Maintenance instructions

clean

We recommend the following steps for cleaning the fronts:

Before cleaning, dust the fronts. Wipe the fronts only with a microfiber cloth dampened with warm water or with a non-abrasive cleaning solution intended exclusively for cleaning furniture. Also, the solution should not contain alcohol, acid, acetone or other solvents!

Warning! Both synthetic and natural cleaning products can often be acidic (e.g. contain lemon extract, etc.).

It is forbidden to write on the surface of the protective film with a felt-tip pen or marker, as there is a risk that it will penetrate the protective film and leave marks on the surface of the front. Remove the protective film from the fronts only after the assembly is completed.

Technical and General Recommendations

We recommend that the temperature of the space where the doors are installed be between +10°C and +40°C and the air humidity be below 60% to keep the doors in the best condition.

In the case of freestanding cooker hoods, we suggest installing the upper fronts at a minimum distance of 5-10 cm from the hood to protect the doors from the heat emitted by the hob.

We do not recommend writing on the surface of the protective film with a marker because it can penetrate the film and leave marks on the surface of the front.

We suggest removing the protective film from the fronts only after completing the assembly to ensure you have the coolest doors.